DIGITAL FILES FOR 3D PRINTING!

Sith Eradicator Full Armor

Private license:
Product may not be sold, given, or assigned to another person or entity in the form it is downloaded from the Site or in 3D printed physical form.

If you like to print for your 501st friends please become a Patreon The Builder Tier so you have the Commercial License, this gives you more acces to cool (free)files and support.  Become a Patreon Builder

Commercial license:
Product may be sold, given, or assigned to another person or entity 
in 3D printed physical form.

The Patreon Builder Tier comes with a commercial license during the time your subscribed. The license ends when you stop being a Builder Patreon. This is an overal license for all the files you got from 3D-PROPS
Become a Patreon Builder

Of course your free to just get the commercial license per 3d files but you would mis all the benefits!


Sith Eradicator Full Armor Files

This is a screen accurate 1:1 printable design of the Sith Eradicator from Star Wars The Old Republic.
Also seen or used by acolytes and Sith Lord Adraas

This is the full armor set.
Follow up on the progress and share your build and experience on my SWTOR build page. https://www.facebook.com/groups/swtor.armourbuildgroup/

Our advice/recommendations: Print with plenty support with 2 dense layers The overall wall thickness is 3mm so its good enough to print it with 3 wall layers and with 100% infill.

Sized / scalled to a 1.85 male

Bonus: 2 types of female chest added.

This design is commissioned by us and made by the talented Johan Joao. 3D-PROPS has the full rights to this design.

Full set of files saves you €10,-
Select the files and license you want and checkout. You will receive a link to download the files in 24 hours.

Handy tool:  ARMORSMITH DESIGNER

Sith Full Armor FIles

€ 50,00


Sith Eradicator Helmet Files

This is a screen accurate 1:1 printable design of a Sith Eradicator helmet from Star Wars The Old Republic.
Also seen or used by acolytes and Sith Lord Adraas

This is the first part of the whole armor set, the rest can be found on this page
Follow up on the progress and share your build and experience on my SWTOR build page. https://www.facebook.com/groups/swtor.armourbuildgroup/

Our advice/recommendations: Print with plenty support with 2 dense layers The overall wall thickness is 3mm so its good enough to print it with 3 wall layers and with 100% infill.

This is a small design, for males we recommend to add 5% to 10% of size.

This design is commissioned by us and made by the talented Johan Joao. 3D-PROPS has the full rights to this design.

Select the files and license you want and checkout. You will receive a link to download the files in 24 hours.

3D FILES SITH MASK

€ 10,00