DIGITAL FILES FOR 3D PRINTING!

Sith Eradicator Full Armor

Sith Eradicator Full Armor Files

This is a screen accurate 1:1 printable design of the Sith Eradicator from Star Wars The Old Republic.
Also seen or used by acolytes and Sith Lord Adraas

This is the full armor set.
Follow up on the progress and share your build and experience on my SWTOR build page. https://www.facebook.com/groups/swtor.armourbuildgroup/

Our advice/recommendations: Print with plenty support with 2 dense layers The overall wall thickness is 3mm so its good enough to print it with 3 wall layers and with 100% infill.

Sized / scalled to a 1.85 male

Bonus: 2 types of female chest added.

This design is commissioned by us and made by the talented Johan Joao. 3D-PROPS has the full rights to this design.

Full set of files saves you €10,-
Select the files and license you want and checkout. You will receive a link to download the files in 24 hours.

Sith Full Armor FIles

€ 70,00

  • Available

Sith Eradicator Helmet Files

This is a screen accurate 1:1 printable design of a Sith Eradicator helmet from Star Wars The Old Republic.
Also seen or used by acolytes and Sith Lord Adraas

This is the first part of the whole armor set, the rest can be found on this page
Follow up on the progress and share your build and experience on my SWTOR build page. https://www.facebook.com/groups/swtor.armourbuildgroup/

Our advice/recommendations: Print with plenty support with 2 dense layers The overall wall thickness is 3mm so its good enough to print it with 3 wall layers and with 100% infill.

This is a small design, for males we recommend to add 5% to 10% of size.

This design is commissioned by us and made by the talented Johan Joao. 3D-PROPS has the full rights to this design.

Select the files and license you want and checkout. You will receive a link to download the files in 24 hours.

3D FILES SITH MASK

€ 20,00


Sith Gauntlet Files

This is a screen accurate 1:1 printable design of a Sith Eradicator gauntlet from Star Wars The Old Republic.
Also seen or used by acolytes and Sith Lord Adraas

The rest of the files can be found on this page
Follow up on the progress and share your build and experience on my SWTOR build page. https://www.facebook.com/groups/swtor.armourbuildgroup/

Our advice/recommendations: Print with plenty support with 2 dense layers The overall wall thickness is 3mm so its good enough to print it with 3 wall layers and with 100% infill 

This design is commissioned by us and made by the talented Johan Joao. 3D-PROPS has the full rights to this design.

Select the files and license you want and checkout. You will receive a link to download the files in 24 hours.

Sith Gauntlet FIles

€ 20,00


Sith Eradicator Chest Files

This is a screen accurate 1:1 printable design of the chest for the Sith Eradicator from Star Wars The Old Republic.
Also seen or used by acolytes and Sith Lord Adraas

This is the chest armor pauldron set.
Follow up on the progress and share your build and experience on my SWTOR build page. https://www.facebook.com/groups/swtor.armourbuildgroup/

Our advice/recommendations: Print with plenty support with 2 dense layers The overall wall thickness is 3mm so its good enough to print it with 3 wall layers and with 100% infill.

Sized / scalled to a 1.85 male

Bonus: 2 types of female chest added.

This design is commissioned by us and made by the talented Johan Joao. 3D-PROPS has the full rights to this design.

Full set of files saves you €10,-
Select the files and license you want and checkout. You will receive a link to download the files in 24 hours.

Sith Eradicator Chest Files

€ 20,00

  • Available

Sith Eradicator Leg Files

This is a screen accurate 1:1 printable design of the Legs for the Sith Eradicator from Star Wars The Old Republic.
Also seen or used by acolytes and Sith Lord Adraas

This is the Leg set.
Follow up on the progress and share your build and experience on my SWTOR build page. https://www.facebook.com/groups/swtor.armourbuildgroup/

Our advice/recommendations: Print with plenty support with 2 dense layers The overall wall thickness is 3mm so its good enough to print it with 3 wall layers and with 100% infill.

Sized / scalled to a 1.85 male

This design is commissioned by us and made by the talented Johan Joao. 3D-PROPS has the full rights to this design.

Full set of files saves you €10,-
Select the files and license you want and checkout. You will receive a link to download the files in 24 hours.

Sith Leg Files

€ 20,00