Shea Vizsla full armor SWTOR 3D Files

This is a screen accurate 1:1 printable design of Shae Vizsla her full armor from Star Wars The Old Republic.

This is the ffull armor set scale 1:1 3D printable.
Follow up on the progress and share your build and experience on my SWTOR build page. https://www.facebook.com/groups/swtor.armourbuildgroup/

Our advice/recommendations: Print with plenty support with 2 dense layers The overall wall thickness is 3.5mm so its good enough to print it with 3 wall layers and with 100% infill 

This is a female based design at 1.70 m. for each 5 cm of length I recommend to add 3% in scaling.

This design is commissioned by us and made by the talented Skylu. 3D-PROPS has the full rights to this design.

Select the files and license you want and checkout. You will receive a link to download the files in 24 hours.

 

Shea Vizsla full armor

€ 75,00

  • Available

Shae Vizsla Helmet SWTOR 3D FILES

This is a screen accurate 1:1 printable design of Shae Vizsla her helmet from Star Wars The Old Republic.

This is the first part of the whole armor set, the rest will follow in the next following months.
Follow up on the progress and share your build and experience on my SWTOR build page. https://www.facebook.com/groups/swtor.armourbuildgroup/

4/12/2019 UPDATE: Helmet split in two pieces for smaller printers.

Our advice/recommendations: Print with plenty support with 2 dense layers The overall wall thickness is 3.5mm so its good enough to print it with 3 wall layers and with 100% infill For best details print the ear and nose pieces with a resin printer or FDM at 0.1 layerhight. The ear antenna can be mounted with a M4 10mm screw

This is a female based design at 1.70 m. for each 5 cm of length I recommend to add 3% in scaling.

This design is commissioned by us and made by the talented Skylu. 3D-PROPS has the full rights to this design.

Select the files and license you want and checkout. You will receive a link to download the files in 24 hours.

 

3D FILES SHAE VIZSLA HELMET

€ 20,00

Shae Vizsla Torso Pack SWTOR 3D FILES

This is a screen accurate 1:1 printable design of Shae Vizsla her torso armor from Star Wars The Old Republic.

Follow up on the progress and share your build and experience on my SWTOR build page. https://www.facebook.com/groups/swtor.armourbuildgroup/

Our advice/recommendations: Print with plenty support with 2 dense layers The overall wall thickness is 3.5mm so its good enough to print it with 3 wall layers and with 100% infill 
All parts will fit a CR-10S printer 30x30x40cm


This is a female based design at 1.70 m. for each 5 cm of length I recommend to add 3% in scaling.

This design is commissioned by us and made by the talented Skylu. 3D-PROPS has the full rights to this design.

Select the files and license you want and checkout. You will receive a link to download the files in 24 hours.

€ 30,00

  • Available
  • 8-9 weeks1

Shae Vizsla Chest Armor SWTOR 3D FILES

This is a screen accurate 1:1 printable design of Shae Vizsla her chest armor from Star Wars The Old Republic.

Follow up on the progress and share your build and experience on my SWTOR build page. https://www.facebook.com/groups/swtor.armourbuildgroup/

Our advice/recommendations: Print with plenty support with 2 dense layers The overall wall thickness is 3.5mm so its good enough to print it with 3 wall layers and with 100% infill 
All parts will fit a CR-10S printer 30x30x40cm


This is a female based design at 1.70 m. for each 5 cm of length I recommend to add 3% in scaling.

This design is commissioned by us and made by the talented Skylu. 3D-PROPS has the full rights to this design.

Select the files and license you want and checkout. You will receive a link to download the files in 24 hours.

€ 15,00

  • Available
  • Ships within 3-5 days1

Shae Vizsla Jetpack SWTOR 3D FILES

This is a screen accurate 1:1 printable design of Shae Vizsla her jetpack from Star Wars The Old Republic.

Follow up on the progress and share your build and experience on my SWTOR build page. https://www.facebook.com/groups/swtor.armourbuildgroup/

Our advice/recommendations: Print with plenty support with 2 dense layers The overall wall thickness is 3.5mm so its good enough to print it with 3 wall layers and with 100% infill 
All parts will fit a CR-10S printer 30x30x40cm

This design is commissioned by us and made by the talented Skylu. 3D-PROPS has the full rights to this design.

Select the files and license you want and checkout. You will receive a link to download the files in 24 hours.

€ 15,00

  • Available
  • Ships within 3-5 days1

Shae Vizsla Arm Cylinders SWTOR 3D FILES

This is a screen accurate 1:1 printable design of Shae Vizsla her arm cylinders from Star Wars The Old Republic.

Follow up on the progress and share your build and experience on my SWTOR build page. https://www.facebook.com/groups/swtor.armourbuildgroup/

Our advice/recommendations: Print with plenty support with 2 dense layers The overall wall thickness is 3.5mm so its good enough to print it with 4 wall layers and with 15% infill 
All parts will fit a CR-10S printer 30x30x40cm

This design is commissioned by us and made by the talented Skylu. 3D-PROPS has the full rights to this design.

Select the files and license you want and checkout. You will receive a link to download the files in 24 hours.

€ 5,00

  • Available
  • Ships within 3-5 days1