E-22 PARTS

Project: E-22 Heavy Blaster Rifle

Scale: 1:1
3D Printed, Anycubic Mono X, Resin Grey and FDM printer Cr-10V2 PLA Black


Design credits: 3D-PROPS

We wil guide you step by step in the process of building this blaster.
You can find the KIT in the regular shop.
If you have any questions feel free to send us a message on Facebook or Patreon or by mail.

Note: If you dont want to gather all the hardware or electronics I made two kits available at a reduced Patreon price. If you would like to gather the parts yourself, I will guide you into the right directions to find them or at least provide you with the right sizes.

For individual parts checkout my hardware page.

HARDWARE BUNDLE E-22

1x ALUMINIUM TUBE 35 X 620         €7.50
1x ALUMINIUM TUBE 35 X 100          €2.00
2X ALUMINIUM TUBE 45 X 200       €8.00
1x M300 SUREFIRE SCOUTLIGHT   €50.00
1x PICATINY WEAVER                         €7,50

1 PAIR SWIVELS                                    €7,50
1 SET SLING AND SLIDERS                €7,50
1 SET ORIGINAL T-TRACKS               €30,00
1 SET SCREWS                                      €10,00
__________________________________________

                                                               €130.00   

YOU CAN CHECKOUT EACH ITEM ON THIS PAGE:
https://www.3d-props.com/shop/hardware/               

E-22 PATREON HARDWARE KIT

€ 145,00

  • 2 kg
  • Available
  • Ships within 5-10 days1

LED DIY KIT E-22 PATERON

THE LED KIT
2x RED ACRYLIC RODS
7x 5mm RED LED (4X side windows, 2X sideplate under M300, 1x Hengstler)
3x Resin LED HOLDERS
1,5 meter electric wire
1x On/OFF switch
1x CR123A Battery holder

LED DIY KIT E-22 PATERON

€ 35,00

  • Available
  • Ships within 5-10 days1

BLAST FX

For electronics I recommend you go to TRamp facebook page for a BLastFX kit.
Please let Paul know you came from 3D-PROPS.COM

Keep in mind that he is a very busy man just like me and it can take up to 2 months to get your order due to the workload.

https://www.facebook.com/trooperamp